


The Nu-Vista Uni PSU is a high-end power supply for Nu-Vista source devices.
The Nu-Vista Uni PSU is an upgrade power supply for the Nu-Vista Vinyl 2, Nu-Vista DAC and a yet to be announced new Nu-Vista CD player.
The Nu-Vista Uni PSU includes three completely separate power supplies . Each power supply consists of an independent encapsulated transformer made using special technology with shielding between windings, DC blocking circuitry and also a complex power filter to provide clean, independent voltage for your devices.
As in the Nu-Vista PRE, PAS and PAM, this approach will achieve better noise performance, by moving the AC mains power supply from the main unit and build it into another matching box. Independent power connections for each of the audio channels as well as for the control systems provide even greater sound depth and audio channel separation.
We are taking advantage of the extra space to set up mains and output filtering a step above what is usually possible in one-box solutions. This quietens up the supplies and results in almost no mains-borne artefacts getting into the sensitive audio circuitry.
| Input power supply | 230V/115V selectable on the back panel, AC 50/60Hz |
| Power consumption | 150 Watts maximum, <0.5 W in standby (orange LEDs STANDBY) |
| LH POWER - output voltages | |
| Voltage for heating the tubes | 16V DC |
| Positive voltage for audio circuits | + 34V DC |
| Negative voltage for audio circuits | - 34V DC |
| RH POWER - output voltages | |
| Voltage for heating the tubes | 16V DC |
| Positive voltage for audio circuits | + 34V DC |
| Negative voltage for audio circuits | - 34V DC |
| CONTROL - Output voltages | |
| Standby voltage | 5V DC |
| Voltage for control circuits and display | 12V DC |
| Control signals | PWR_OK, PWR_ON |
| Weight | |
| Unit only, unboxed | 24,5 kg |
| Maximum Dimensions | |
| Nu-Vista UNI PSU (WxHxD) | 483 x 187,5 x 480 mm |
| Standard accessories | |
| 1x IEC type mains lead | 10-Amp type |
| 1x LH power cable (1m length) | 5-pin XLR |
| 1x RH power cable (1m length) | 5-pin XLR |
| 1x Control power cable (1m length) | 7-pin XLR |
| 4x Spike Foot | |
| 4x Spike Foot Cup | |
| 4x Spike Foot Screw | |
| 4x Felt pad for Spike Foot Cup | |
| 4x Felt pad for Standard Foot |